When you first install your wardrobe doors, they are usually silent. With time, you hear an annoying creaking and rattling sound, especially when someone opens and closes them frequently. This randomnoise happens when something obstructs the slab's smooth movement.
Some unwanted squeaks causes include slab misalignment, excess moisture, loose hinges, and dirt. If you are experiencing this problemrandomly or regularly, the good news is that there is a solution. In this article, you will learn in detail why your doorsmake unnecessary loudsounds and how they can be fixed.
Reasons Why Closet DoorsMake Noise
Slab noise becomes consistent when something is rubbing against it. First, you need to examine why these sounds appear so that you know how to stop them. Here are some common reasons:
Sliding Door Misalignment
Misalignment of the slab with its track during installation results in a squeakingnoise in your closet. Ensure that hangers and rollers are in place. If you cannot correct their position yourself, call the company representatives where you bought the door.
Excess Moisture In Wet Seasons
During the rainy period, excessive moisture mayalso be a reason for slabs to make unpleasant sounds. When the humidity in the house increases, it experiences a condition called "wrapping.” This is the deformity that happens in the wood when its inner components change unevenly in different parts. Wrapping can cause a slab to makenoise. The excess moisture also allows mold and mildew to grow on its surface, which accumulate dirt and bad smell.
The accumulation of grime and dirt along a sliding door track often causes a squeakingnoise. As you open and close it, dirt gradually accumulates and becomes the reason for the annoying creak. Note that dirt appears quickly even if you have not used the wardrobe in a while.
Handles tend to loosen over time, depending on how often you use the closet. A loose knob can make your doorssqueaky. Thus, you should check them periodically.
Hinges connect a slab to its frame. Additionally, they are responsible for their smooth swinging. With time, there will be friction with pins. In case of friction between the pivot pins or loosened hinge leaves, you will likely experience a disturbing squeak.
In rare cases, the reason lies in the incomplete mechanism package: it may lack bearings (this applies to a complex sliding system). You will have to remove the slab and install necessary elements.
How To Fix A Squeaky Closet Door
Everybody enjoys the peace that comes with the quietness of home. A squeaky slab causes distraction and can affect your comfort. To restore it, fix it by following these guidelines:
If you notice friction around the hinges, it is time to lubricate them. This process involves oiling or greasing the joint between the pivot pin and hinge leaves. Lubrication will reduce that annoying noise you getrandomly.
Sometimes rust appears on metal elements — remove it, being careful not to damage the surface, and then apply a lubricant.
Repair and Lubricate the Knobs
The most common reason for the sound appearance is absence or lack of lubrication. If this was not done at the factory, then the handle may creak during use.
When you notice loose knobs, the next step is to tighten up the screws. Use a screwdriver to do it yourself, and enjoy silence. Sometimes the problem is in the lock mechanism. If it is not lubricated, then rubbing parts make different sounds.
The next reason may be incorrect handle installation. You can try to repair the construction yourself or call a professional.
Dehumidify Your Room
During the rainy season, dehumidifiers are an effective way to reduce moisture. This will help to reduce the excess of moisture in the home that causes slabs to makesounds. If you don't have a dehumidifier, wipe them daily in wet seasons.
Get rid of dirt accumulation on doors regularly — at least once a week. If you notice dirt in between, don't wait; wipe it immediately.
Seal Gaps and Openings
If you notice cracks or gaps along sliding door tracks, seal them with weather-strip or acoustic sealant. They help reduce noise coming from the opening and closing. Ensure you use a strong seal that matches your slab weight.
Service The Rollers
If you use a sliding construction, ensure you service its roller regularly to avoid squeaking. Spray the rollers with lubricants for smooth rotation. If you can't service them yourself, hire an expert to get rid of sounds.
Hire An Expert Door Installer
If you have applied all our guidelines above and the problem persists, hire a professional installer to examine, identify, and stop it. This is the most appropriate option when you have exhausted all available options, and noise becomes unbearable. The cost of hiring might be expensive, but it's worth it.
Doorcreak annoys even the most patient people. Regardless of the reason, the above solutions can permanently reduce it. Now that you know the issue and its solution, spring into action to enjoy a noise-free closet.